Polycarbonate Seal with Laser Engraving Model-A-PC-02

The Polycarbonate Anchor type Seal with Laser Engraving indicating with double locking system with trapezoid shape, suitable for effectively sealing indoor/outdoor type energy meter and terminal cover. This polycarbonate seal design with double locking system in one piece, easy to install without use of any tool. Once installed it will not possible to open forcibly without completely destroying the body of the seal. Sealing wire is non-corrosive, non magnetic stainless steel type in any customized size. Default length of seal is 150mm. See-through body give a complete visualization of its fixing mechanism and provide clear indicating of tampering.

Technical Details

Model A-PC-02
Material Seal Body : Polycarbonate
Seal Wire : Stainless Steel 304 Grade twisted seal wire of size 0.4 mm and 0.2 mm, Total Outer Diameter : 0.6 mm
Print Laser engraving company name, logo, same serial number in both male and female part of seal, etc.
Color Natural, Red, Green, Blue, yellow , pink or any customized color.
Testing Seal is tested in ERDA of following tests;

·         Heat Resistant Test

·         Boiling water test

·         Chemical Test

·         Tensile Strength (Breaking Load) and pull out force

·         Salt Spray ( fog) Test

Tensile Strengthg 23.00 Kgf
Package ·         50 Seals pack in a poly bag

·         20 poly bags pack in a jumbo Bag

·         Jumbo Bag Size :650 X 500 X 280  mm

·         Gross Weight : 4.5 Kg

·         Net Weight : 4.0 Kg.